Panasonic Lumix DMC-G5 Owner's Manual page 223

Striping or flicker may appear under lighting such as fluorescent lighting and LED
lighting fixture.
• This is characteristic of MOS sensors which serve as the camera's pickup
sensors.
This is not a malfunction.
•
When you see noticeable flicker or striping while recording a motion picture, you
can reduce the flicker or striping by setting up [Flkr Decrease]
the shutter speed. It is possible to select a shutter speed from
[1/50], [1/60], [1/100], or [1/120].
The brightness or the hue of the recorded picture is different from the actual scene.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may
introduce slight changes to brightness and color. These are a result of the characteristics of the light
source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting, LED
lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may change or
horizontal striping may appear on the screen.
Bright spot not in subject is recorded.
• There may be defective pixels in the image sensor. Perform [Pixel Refresh] (P77).
You cannot compensate the exposure.
•
Are you in Exposure Compensation operation?
> Press the rear dial to switch to Exposure Compensation operation.
The function lever does not work.
> Set the [Function Lever] to [AUTO].
Subject cannot be locked.
(AF tracking not possible)
•
If the subject contains sections that differ in color to the surroundings, touch those sections or the
main colors of the subject to set the AF frame (P97).
Operation sound is small.
•
Is your finger covering up the speaker?
Others
(P15)
(P10)
- 223 -
(P162) and fixing
(P88)