The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Is the AE Lock
(P104)
Multiple pictures are taken at one time.
> Cancel the settings of White Balance Bracket (P110).
•
Is the Burst
(P89)
or Auto Bracket
> Set the drive mode to Single.
•
Is the self-timer
(P93)
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
•
Is [Focus Priority] in the [Custom] menu set to [OFF]?
In this case, the picture may not be properly focused even if [AFS], [AFF] or [AFC] in [Focus Mode] is
set.
•
Is the AF Lock
(P104)
The recorded picture is blurred. The Optical Image Stabilizer is not effective.
•
The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures.
> We recommend using a tripod and the self-timer
speed.
•
Are you using a lens which supports the stabilizer function?
Taking pictures using White Balance Bracket is not possible.
•
Is there any memory remaining on the card?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
([Sensitivity] is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors
etc. noise will appear.)
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the
items other than [Noise Reduction].
> Take pictures in bright places.
> Set the [Long Shtr NR] to [ON].
•
Is the [Picture Size]
•
Is the [Digital Zoom] set?
applied incorrectly?
(P91)
set?
(P38)
set to [
]?
applied incorrectly?
(P111)
(P148)
(P155)
(P149)
or the [Quality]
(P80)
Others
(P88)
(P37)
(P78)
(P167)
(P93)
when taking pictures with a slow shutter
(P16)
(P150)
set low?
- 222 -
(P33)