Panasonic Lumix DMC-G5 Owner's Manual page 187

∫
To print the date
After setting the number of prints, set/cancel printing with the recording date by touching [Date].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set to
print the date. For further information, ask at your photo printing store or refer to the operating
instructions for the printer.
•
The date print feature is disabled for pictures that are stamped with text.
Note
• The number of prints can be set from 0 to 999.
•
Depending on the printer, the date print settings of the printer may take precedence so check if this
is the case.
•
It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
•
If the file is not based on the DCF standard, the DPOF print setting cannot be set.
•
You cannot use [Print Set] for the following pictures.
–
Motion pictures
– Pictures taken with [
Playback/Editing
]
- 187 -