Product Specifications; Getting Started; Battery Installation - VTech Kidizoom Camera User Manual

PRODUCT SPECIFICATIONS

Display: 1.5" CSTN color LCD
Photo Resolution: 640x480
Memory: 64MB built-in memory (approximately 45MB free memory for
photos)
Store up to 500 photos (photo size = 640x480 resolution in JPEG
format)
Supported File Formats: JPEG
Supported Hardware: USB cable (included) for computer connection
Zoom: 2X digital zoom

GETTING STARTED

BATTERY INSTALLATION

Note: Adult assembly is required for battery installation. Tools required
for battery installation: Phillips screwdriver (not included).
• Make sure the camera is turned OFF.
• Locate the battery cover on the bottom of the camera. Loosen the
screws using a screwdriver and remove the battery cover.
• Install 4 new "AA" batteries (2 on each side) as illustrated above.
(The use of new, alkaline batteries is recommended for maximum
performance.)
• Replace the battery cover and tighten the screws. Do not over-tighten
screws.
Note: If Kidizoom Camera™ is not
working properly after the batteries
have been replaced, press the Reset
Button and then restart the camera.
Note: The photos stored in the
camera's memory will not be affected by resetting the camera. However,
you will need to select the camera's language setting again, and the
volume setting will return to the default level.