Hitachi FDV16VB - 5/8" Reversible Hammer Drill Disassembly & Reassembly Procedures page 5

1-3. Lubrication
(1) Apply ATTOLUB MS No.2 (Code No.309922) to the following.
z# Holder [13] <12> (12):
z# Gear [8] <7> (7):
z# Spindle [4] <3> (3):
z# Armature [15] <14> (14): Pinion ........................................................ 1 g
1-4. Tightening Torque
z# Drill Chuck [3] <2> (2).......................................................................... 29.4 - 39.2 N·m (300 - 400 kgf-cm)
z# Tapping Screw (W/Flange) D4 x 20 (Black) [20] <19> (19)
z# Tapping Screw (W/Flange) D4 x 16
1-5. Wiring Diagrams and Lead Wire Arrangements
Conduct wiring in accordance with the diagrams and arrangements illustrated below. However, be particularly
careful not to confuse the different arrangements for Models FDV 16VB, FDV 16T and FDV 16.
Ratchet...................................................... 1 g
Teeth ......................................................... 2 g
Ratchet...................................................... 0.5 g
Needle bearing contacting portion ........... 1 g
Ball chamber............................................. 0.5 g
[33] <29> (29)
........ 2.0 ± 0.5 N·m (20 ± 5 kgf-cm)
5