Hitachi DH30PC2 - 1 3/16 Inch SDS Instruction Manual page 25

10. Driving Screws (Rotation only)
Phillips Driver Bit
Bit No.
No.2 1/8" – 3/16" (3 – 5 mm)
No.3 1/4" – 5/16" (6 – 8 mm)
11. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
Bit No. Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Screw Size Length
1" (25 mm)
1" (25 mm)
English
Code No.
971511Z
971512Z
25