Connecting An Antenna Or Cable Tv (No Box); Connecting A Dvd Or Blu-Ray Player - Insignia NS-19E720A12 User Manual

Insignia 15"/19"/22"/24" LED-LCD TV

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect a coaxial cable to the ANT/CABLE IN
jack on your TV and to the antenna or cable TV
wall jack.
15-inch and 19-inch models
Coaxial cable
22-inch and 24-inch models
AUDIO VGA
DIGITAL
OUTPUT HDMI 1 PC IN
3 Plug your TV's power cord into a power outlet,
then turn on your TV.
4 Go through the Setup Wizard on page 28.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Coaxial cable
Y P P L AUDIO R
B R
COMPONENT IN ANT/CABLE IN
www.insigniaproducts.com

Connecting a DVD or Blu-ray player

Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI cable (not included) to an
HDMI jack on your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
15-inch and 19-inch models
DVD or Blu-ray player
22-inch and 24-inch models
DVD or Blu-ray player
3 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the DVD or Blu-ray
player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to highlight HDMI 1 or HDMI 2,
then press ENTER.
Note
You can also press HDMI repeatedly to select the
DVD or Blu-ray player.
17