Input Menu - Dukane 401-8755E-01 User Manual

INPUT Menu

INPUT Menu
With the INPUT menu, the items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
3
Using the buttons ▲/▼ switches the progress mode.
TV ó FILM ó TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or COMPONENT VIDEO input of 55i (480i)
or 65i (576i) signal.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the -3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
Using the buttons ▲/▼ switches the noise reduction mode.
HIGH ó MID ó LOW
• This function performs only at a VIDEO input, an S-VIDEO or
COMPONENT VIDEO input of 55i(480i) or 65i(576i) signal.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the buttons ▲/▼ switches the mode for color space.
AUTO ó RGB ó SMPTE40 ó REC709 ó REC60
• This item can be selected only for an RGB signal or a component
video signal (except signals of SCART RGB from the component
video port).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Description