Sharp PG-F255W - Notevision WXGA DLP Projector Setup Manual page 33

\ Take the following steps for checking the network settings for the computer.
1. Open a command prompt.
• In the case of Windows
Prompt" in order.
• In the case of Windows
➔ "Command Prompt" in order.
2. After launching the command prompt, enter the command "ipconfig", and press the "Enter"
key.
Note
• Communication may not be established even after carrying out the network settings
for the computer. In such cases, restart your computer.
C:\>ipconfig
Note
• Usage examples of ipconfig
C:\>ipconfig /?
C:\>ipconfig
C:\>ipconfig /all displays all the setting information related to TCP/IP.
3. To return to the Windows
2000: click "start" ➔ "Programs" ➔ "Accessories" ➔ "Command
®
® ®
XP, Windows Vista
displays how to use "ipconfig.exe".
displays the set IP address, subnet mask and default gateway.
®
screen, enter "exit" and press the "Enter" key.
Troubleshooting
: click "start" ➔ "All Programs" ➔ "Accessories"
-33