Setting And Adjusting The Projector (Settings & Adjustments); Setting The Security (Network - Security) - Sharp PG-F255W - Notevision WXGA DLP Projector Setup Manual

Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: "Picture" screen display for COMPUTER
On these screens, you can make projector
settings or adjustments. You can set or adjust
the following items :
Picture Mode
• • • • •
• • • • • CLR Temp
TM
• • • • • BrilliantColor
Progressive
• • • • •
DNR
• • • • •
Lamp Setting
• • • • •
• • • • • Resolution Setting
Signal Type
• • • • •
Video System
• • • • •
Dynamic Range
• • • • •
• • • • • Resize
OSD Display
• • • • •
Background
• • • • •
Note
• If you click the "Refresh" button before the
screen is displayed completely, an error
message ("Server Busy Error") will be dis-
played. Wait for a moment and then oper-
ate again.
• You cannot operate this page while the pro-
jector is warming up.
• For details about each item, refer to the
projector's operation manual.
Setup Guide
• • • • •
• • • • • Projection Mode
• • • • • OSD Language
Auto Sync
• • • • •
Auto Power Off
• • • • •
Auto Restart
• • • • •
• • • • • System Sound
Internal Speaker
• • • • •
Audio Input
• • • • •
RS-232C Speed
• • • • •
• • • • • Fan Mode
All Reset
• • • • •
Controlling the Projector via LAN
Setting the Security
(Network – Security)
On this screen, you can make settings relat-
ing to security.
Items
User Name Setting of user name for
security protection.
Password Setting of password for
security protection.
Accept IP It is possible to set up to three
Address IP addresses allowing connec-
tion to the projector.
All IP No limits are set to IP addresses
Addresses connecting to the projector.
From only
For security improvement, only an
specific IP IP address set by "Address 1-3"
addresses can be connected to the projector.
Note
• User Name and Password can be up to 8
characters.
• You can input the characters below :
a-z, A-Z, 0-9, -, _
Description
-17