Ibm/As400 - Brother HL-4000CN Network User's Manual

IBM/AS400

To use a print server with an IBM AS/400 running IBM's TCP/IP gateways services
for OS/400 (the OS/400 system must be v3.1 or later)
Use the CFGTCP command at your OS/400 prompt to add the print server's TCP/IP
address to the AS/400 host table.
Use the following one-line OS/400 command to create the LPD queue:
where <queuename> is the new AS/400 print queue name, <service> is the print server
service name,
recommended if in doubt), and <ipaddress> is the IP address of the print server.Note that
the IP address and description must be enclosed in single quotes.
For example:
If you are using A4 paper, you may find that the printer page formatting is incorrect
(this is probably because your AS/400 system is set to Letter sized paper), to resolve
this problem, do the following:
Edit the "Host Print Transform" source code:
At the paper definition, alter the existing hex codes for "Letter Size", 1B 26 6C 02 41
to hex codes for "A4 Size", 1B 26 6C 32 36 41
OS/400 version 4, 5, 5.1
You can also use the following command line to create a printer definition:
CRTDEVPRT DEVD(BR2) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9100) FONT(011) PARITY(*NONE) STOPBITS(1)
TRANSFORM(*YES) MFRTYPMDL(*HP5SI) PPRSRC1(*A4) PPRSRC2(*A4)
RMTLOCNAME('10.0.0.200') SYSDRVPGM(*HPPJLDRV) TEXT('Arne''s
Printer')
CRTOUTQ OUTQ(<queuename> RMSTSYS
(*INTNETADR) RMTPRTQ(<service>)
AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER)
MFRTYPMDL (<driver>)
INTNETADR('<ipaddress>') TEXT
('<description>')
BINARY_P1 , <driver> is the OS/400 printer driver name (*HP4 is
CRTOUTQ OUTQ(BR1) RMTSYS(*INTNETADR)
RMTPRTQ(BINARY_P1) AUTOSTRWTR(1) CNNTYPE(*IP)
DESTTYPE(*OTHER) MFRTYPMDL(*HP5SI)
INTNETADR('10.0.0.200') TEXT('Arnes Printer')
RTVWSCST DEVTYPE(*TRANSFORM) MFRTYPMDL(*HP5SI)
SRCMBR(HP5SI) SRCFILE(QTEMP/SRC)
1-12