Setup Menu - Dukane 8063 User Manual

Multifunctional settings

SETUP Menu

With the SETUP menu, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
KEYSTONE
WHISPER
MIRROR
VOLUME
32
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data  Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the
item MIRROR, if the projector screen is inclined or if the projector is
angled downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE side, this correction
may be excessive. This function should be used with zoom set to
WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL  WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High  Low
Description
MENU [ RGB ]
:SELECT
PICTURE KEYSTONE +0
IMAGE WHISPER NORMAL
INPUT MIRROR NORMAL
SETUP VOLUME 16
SCREEN
OPTION
EASY MENU