Picture Menu - Dukane 8063 User Manual

PICTURE Menu

With the PICTURE menu, items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
BRIGHT
CONTRAST
GAMMA
Using the buttons ▲/▼ adjusts the brightness. :
Using the buttons ▲/▼ adjusts the contrast. :
Using the buttons ▲/▼ switches the GAMMA mode. :
#1 DEFAULT  #1 CUSTOM  #2 DEFAULT
#3 CUSTOM  #3 DEFAULT  #2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then
pressing the button ► or the ENTER button
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern  Gray scale of 9 steps
Ramp  Gray scale of 15 steps
Eight of equalizing bars corresponds to eight of tone level of test
pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar "1". The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
Multifunctional settings
Description
MENU [ RGB ]
:SELECT
PICTURE BRIGHT +0
IMAGE CONTRAST +0
INPUT GAMMA #1 DEFAULT
SETUP COLOR TEMP LOW
SCREEN COLOR +0
OPTION TINT +0
EASY MENU SHARPNESS +0
PROGRESSIVE TURN OFF
MY MEMORY SAVE 1
Light  Dark
Strong  Weak
ENTER :
1 2 3 4 5 6 7 8
+0 +0 +0 +0 +0 +0 +0 +0
GAMMA [ CUSTOM 1 ]
25