Easy Menu; Aspect, Keystone, Mode, Bright; Whisper, Mirror, Reset, Filter Time - Dukane 8063 User Manual

EASY Menu

With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
Item
ASPECT
KEYSTONE
MODE
BRIGHT
CONTRAST
COLOR
TINT
Using the buttons ◄/► switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu (28).
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu (32).
Using the buttons ◄/► switches the mode of picture type.The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL  CINEMA  DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
MODE is "CUSTOM". Please refer to the items GAMMA (25) and
COLOR TEMP (26) of PICTURE menu.
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHT of section PICTURE menu (25).
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu (25).
Using the buttons ◄/► adjusts the strength of whole color.
See the item COLOR of section PICTURE menu (26).
Using the buttons ◄/► adjusts the tint.
See the item TINT of section PICTURE menu (26).
Multifunctional settings
Description
EASY MENU
ASPECT 4:3
KEYSTONE +0
MODE NORMAL
BRIGHT +0
CONTRAST +0
COLOR +0
TINT +0
SHRPNESS +3
WHISPER NORMAL
MIRROR NORMAL
RESET EXECUTE
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
23