Searching An Input Signal; Selecting The Aspect Ratio; Adjusting The Zoom And Focus - Dukane 8063 User Manual

Operating

Searching an input signal

1.
Press the SEARCH button on the remote control.
The projector will begin to check its input ports in order to
find any input signals.
Then when an input is found, the projector will stop
searching and display the image. If no signal is found, the projector will return
to the state selected before the operation.
RGB IN1  RGB IN2  COMPONENT VIDEO  S-VIDEO  VIDEO
Selecting an aspect ratio
1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
 At a RGB signal
NORMAL  4:3  16:9
 At a video signal /no signal
4:3  16:9  SMALL
● The NORMAL mode keeps the original aspect ratio of the signal.
● At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO
input, only 16:9 mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.
Use the zoom knob to adjust the screen size.
2.
Use the focus ring to focus the picture.
18
STANDBY/ON
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE KEYSTONE
ASPECT
MENU
POSITION
ENTER
ESC RESET
FREEZE
POSITION
STANDBY/ON
VIDEO RGB SEARCH
ASPECT AUTO BLANK
VIDEO
MAGNIFY HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END ASPECT
OFF
FREEZE KEYSTONE
MAGNIFY
POSITION MENU
ENTER
ESC RESET
FREEZE
POSITION
Zoom knob
Focus ring
STANDBY/ON
SEARCH
VIDEO RGB
AUTO BLANK
MAGNIFY HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
KEYSTONE
MENU
ENTER
RESET
ESC
STANDBY/ON
RGB SEARCH
AUTO BLANK
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
KEYSTONE
MENU
ENTER
RESET
ESC