Brother HL-3075CW Quick Setup Manual page 19

Other Information
• DO NOT handle the plug with wet hands.
Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if the cord
has become worn or frayed.
• DO NOT touch this product during an electrical storm.
• DO NOT allow this product to come into contact with water. This product should not be used around
standing water including a bathtub, sink, or swimming pool, around appliances containing water
including a refrigerator, or in a wet basement.
• This product should be connected to an AC power source within the range indicated on the rating label.
DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you
have, contact a qualified electrician.
• Always disconnect all cables from the wall outlet before servicing, modifying or installing the
equipment.
• Power Cord Safety:
 This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, call your electrician to replace
your obsolete outlet. DO NOT defeat the purpose of the grounded plug.
Use only the power cord supplied with this product.

 DO NOT allow anything to rest on the power cord. DO NOT place this product where people can walk on
the cord. DO NOT place this product in a position where the cord is stretched or strain is otherwise put
on the cord. Doing so may cause the cord to become worn or frayed.
 If an extension cord is used with this product, make sure that the total ampere ratings on the products
plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that
the total of all products plugged into the AC power outlet does not exceed 15 amperes.
 The power cord, including extensions, should be no longer than 16.5 feet (5 meters).
 We DO NOT advise using an extension cord.
FIRE HAZARDS
• DO NOT use flammable substances, any type of spray, or an organic solvent/liquid that containing
alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead,
use only a dry, lint-free cloth. See Routine Maintenance in the User's Guide for more information on
how to clean the product.
• DO NOT attempt to operate this product with a paper jam or with stray pieces of paper inside the
product. Prolonged contact of the paper with the drum unit could cause a fire.
• DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to
ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a
dry, lint-free soft cloth and dispose of it according to local regulations.
• DO NOT use this product in the vicinity of a gas leak or combustible dust.
19