Web Based Management (Web Browser); Reset Network Settings To Factory Default; For Network Users; Print The Printer Settings Page - Brother HL-3075CW Quick Setup Manual

For Network Users

Web Based Management (web
browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The login name for the Administrator is 'admin'
(case sensitive) and the default password is
'access'.
• We recommend Microsoft
6.0 (or greater) or Firefox 1.0 (or greater) for
®
Windows and Safari 4.0/5.0 for Macintosh.
Please also make sure that JavaScript and
Cookies are always enabled in whichever
browser you use. To use a web browser, you
will need to know the IP Address of the print
server. The IP Address of the print server is
listed on the Print Setting Page.
a
Type http://printer_ip_address/ into
your browser.
(Where printer_ip_address is the IP
Address or the print server name)
 For example: http://192.168.1.2/
See Chapter 10 of the Network User's
Guide.
16
® ®
Internet Explorer
Reset the network settings to the
factory default
To reset all network settings of the print server to its
factory default, follow the steps below.
a
Press the + or - to choose Network.
Press OK.
Network
b
Press the + or - to choose Factory Reset.
Press OK.
Factory Reset
c
Press OK again.
Restart Printer?

Print the Printer Settings Page

The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page:
a
Press the + or - to choose Machine Info..
Press OK.
Machine Info.
b
Press OK again.
Print Settings
c
Press OK again to print the Printer Settings
Page.
Note
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.