Remote Control Unit - Pioneer PDP-4271HD Service Manual

5

Remote control unit

This section describes the functions of the buttons available
when the mode switch has been set to TV. For the buttons for
controlling other equipment, see "Using the remote control
unit to control other devices" starting .
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Simplified remote control unit
(PDP-5071HD/PDP-4271HD only)
14
29
28
27
12
13
5
6
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Mode switch
(with "TV" selected)
1
19
4
3
22
20
26
PDP-4271HD
6
7
1 TV : Turns on the power to the Plasma Display
System or places it into standby mode.
2 Transmission confirmation LED
3 INPUT: Selects an input source of the Plasma Display
System. (INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5,
INPUT 6 and PC) (With the simplified remote control unit,
INPUT toggles between ANT-A, ANT-B, INPUT 1,
INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6 and PC.)
4 SCREEN SIZE: Selects the screen size.
5 SLEEP: Sets the sleep timer.
6 INFO: Displays a channel banner when a TV program
is being watched.
When the TV Guide On Screen™ system is in operation,
displays information about the currently highlighted
channel (if available).
7 HOME MENU: Displays the Home Menu screen.
8 DAY +/-: Jumps to the next or previous day of program
listings in the TV Guide On Screen™ Listing service.
9 / / / : Selects a desired item on the menu screen.
10 REC: When using the TV Guide On Screen™ System,
starts recording with a connected VCR.
11 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels. for details to
set the FAVORITE CH.
While watching, you can toggle the set channels by
pressing A, B, C and D.
12 0 - 9: Selects the channel.
13 •(dot): Enters a dot.
14 CH +/-: Selects the channel.
15 SPLIT: Switches the screen mode among 2-screen,
picture-in-picture, and single-screen.
16 FREEZE: Freezes a frame from a moving image.
Press again to cancel the function.
17 MTS: Selects MTS/SAP or language depending on the
program being watched.
18 ANT: Selects the antenna (A, B). for details.
19 AV SELECTION: Selects audio and video settings.
(AV mode: STANDARD, DYNAMIC, MOVIE, GAME,
USER. PC mode: STANDARD, USER.)
20 DISPLAY: Displays the channel information.
21 TV GUIDE: Displays the TV Guide On Screen™ system.
22 ENTER: Executes a command.
23 PAGE +/- (for the TV Guide On Screen™ system):
Scrolls the program listing screen vertically.
24 RETURN: Returns to the previous menu screen.
25 MENU: Displays a panel menu in the TV Guide On
Screen™ system.
26 CH ENTER: Executes a channel number.
27 CH RETURN:Returns to the previous channel. This button is
disabled while the TV Guide On Screen™ system is displayed.
28 VOL +/-: Sets the volume.
29 MUTING: Mutes the sound.
30 SHIFT: Moves the location of the small screen when in
the picture-in-picture mode.
31 SWAP: Switches between the two screens when in the 2-
screen or picture-in-picture mode.
Luminous remote control buttons (main unit only)
All buttons on the main remote control unit are luminous
and gather and store light. This enables quick access to
the desired function when performing operations in dark
places.
NOTE
• When using the remote control unit, point it at the Plasma
Display.
• for operating buttons not listed on this page.
7
8
A
B
C
D
E
F
183
8