Regulatory Information; Español Regulatory Information - Oki MB441MFP Safety Information Manual

120-volt models
Hide thumbs Also See for MB441MFP:
Table of Contents

Advertisement

Available languages

Available languages

Regulatory Information

ENERGY STAR
As an ENERGY STAR Partner, Oki Data has
determined that this product meets the
ENERGY STAR guidelines for energy
efficiency.
Year 2000 Compliance
This product is Year 2000 Compliant. It contains
information technology that accurately processes date and
time data between the years 1999 and 2000, and carries
no issue for the September 9, 1999 (9999) programming
concern. This product, when used in combination with
products purchased from other manufacturers, whose
products properly exchange data and time information, will
accurately process the date and time.
Federal Communications Commission
(FCC)
Product Name
MB441 (120V)
MB441 (230V)
MB451 (120V)
MB451 (230V)
MB451w (120V)
MB451w (230V)
1. Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
2. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
This device is FCC Class A if the FDI option is
installed.
FCC Administrative Council for Terminal
Attachment Requirements for End Users
This device has been granted a registration number by the
Administrative Council for Terminal Attachment (ACTA),
under Part 68 and ACTA rules and regulations for direct
connection to the telephone lines. In order to comply with
these FCC rules, the following instructions must be
carefully read and applicable portions followed completely.
1. This equipment complies with Part 68 of FCC rules and
the requirements adopted by the ACTA. On the back of
the equipment is a label that contains, among other
information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this inf
®
Model Name
N22205A
N22205B
N22206A
N22206B
N22207A
N22207B
6 - English
2. The following USOC jacks may be used with this
equipment: RJ11C.
3. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is
designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for
details.
4. The REN is used to determine the quantity of devices
which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the
devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of
devices that may be connected to the line, as
determined by the total RENs, contact the local
telephone company. For products approved after July
23, 2001, the REN for this product is part of the product
identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
5. If the equipment, MB441, MB451, MB451w, causes
harm to the telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required. But if
advance notice isn't practical, the telephone company
will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the
FCC if you believe it is necessary.
6. The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide advance
notice in order for you to make the necessary
modifications to maintain uninterrupted service.
7. If trouble is experienced with this equipment (MB441,
MB451, MB451w), please contact the following for
repair and/or warranty information:
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mount Laurel, N.J. 08054-4620
Telephone:(856) 235-2600 or
(800)-OKIDATA (800-654-3282)
If the equipment is causing harm to the telephone
network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
8. This equipment contains no user serviceable parts.
Please contact Oki Data for service.
9. This equipment cannot be used on public coin service
provided by the telephone company. Connection to
Party Line Service is subject to state tariffs. Contact
your state Public Utility Commission, Public Service
Commission, or Corporate Commission for information.
10.If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this MB441, MB451, MB451w does not disable your
alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone
company or a qualified installer.
FCC Telephone Consumer Protection Act
The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any
message unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the
first page of the transmission, the date and time it is sent
and an identification of the business or other entity, or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mb451wmfpMb441Mb451Mb451w

Table of Contents