Administrator Name & Password - Panasonic UF-6950 - Panafax - Multifunction Supplementary Manual

Administrator Name & Password
The user name, and password for the system administrator are established in "Authentication Setting" on page
13 when user authentication is enabled for the first time. Use the following procedure if you subsequently wish
to change the system administrator name, or password.
Note:
You must login to the machine before you can change any setting. See the following sections for details about how to login.
See "Administrator Login" on page 26 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Login to the machine, and then press
Enter the access code (4-digit) set for the machine, and then press
Press , and select "ADMINISTRATOR NAME".
The currently set administrator name is displayed.
Enter the new administrator name, and then press
The name is NOT case-sensitive.
Enter the administrator password, and then press
The password is case-sensitive.
Press STOP to return to standby.
FUNCTION SET
SET .
SET .
ENTER ACCESS CODE
.
ENTER ACCESS CODE
.
SET
DATE & TIME
09-01-2005 12:00
ADMINISTRATOR NAME
panasonic
ADMINISTRATOR NAME
panaadmin
ADMIN. PASSWORD
*****
****
27