Job Tracking Setting - Panasonic UF-6950 - Panafax - Multifunction Supplementary Manual

Job Tracking Setting

This enables or disables Job Tracking. If Job Tracking is enabled, also set the type of log to record, and the
Email address to which it is to be sent.
Note:
Before performing this setup, you first need to register the destination Email address for the log in the Auto Dialers.
Furthermore, change the setting of the Fax Forward (Fax Parameter No. 54, FAX FORWARD) parameter to Invalid.
Set the POP Parameters so as to receive the emails automatically when using the Job Tracking function. Otherwise,
your machine cannot receive any emails.
Make sure that the Fax Parameters are NOT set as below.
Auto POP Receive (Fax Parameter No. 147) : Invalid
POP Timer (Fax Parameter No. 146)
When the User Authentication function is enabled, you must login to the machine to change settings. See the following
sections for details about how to login.
See "Administrator Login" on page 26 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
The Job Tacking Settings are cleared if the Authentication Setting of all functions is changed to Invalid.
Login to the machine, and then press
Enter the access code (4-digit) set for the machine, and then press
Press , and then
Enable ("VALID") or disable ("INVALID") the Job Tracking function.
: Disables Job Tracking.
SET
SET : Enables Job Tracking.
If you selected (VALID), next specify the type of log to record, and the
Email address to which it is to be sent.
Select the type of log to record.
: (TX) Records sending only.
SET
: (RX) Records receiving only.
SET
SET : (TX&RX) Records sending and receiving.
A prompt appears for entering the destination Email address.
Specify the Email address to which to send the log.
Select the destination Email address to which to send the log from the
addresses previously set in the Auto Dialers.
Press twice. (In case the Fax Parameter No. 119, Qwerty
SET
Keyboard, is set to One-Touch, press
22
: 0 minute
FUNCTION
SET .
once.)
SET
ENTER ACCESS CODE
SET .
ENTER ACCESS CODE
SET .
FAX PARAMETER(1-182)
131 JOB TRACKING
1:INVALID
JOB TRACKING=1
1:TX 2:RX 3:TX&RX
JOB TRACKING
ENTER ADMIN. ADDR
Panasonic User
panauser@pana.com
****
NO.=