Sending A Fax Using One-Touch Dial Feature And Phonebook - Panasonic KX-MB2061 Operating Instructions Manual

8. Fax
#402 is activated (page 83). For an explanation of the
messages, see page 109.
8.1.2 Using the automatic document feeder
MFaxN
MMonitorN
MQuick ScanN
1
If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
2
Set the original (page 25).
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 57.
R To select the contrast, see page 57.
4
MMonitorN
5
Dial the fax number.
6
When a fax tone is heard:
Press MStartN.
When the other party answers your call:
Lift the handset and ask them to press their start
button. When the fax tone is heard, press MStartN.
Note:
R After pressing MStartN, you can replace the handset.
R To stop sending, see page 108.
R Do not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialing a fax number
1. Enter the fax number.
2. Set the original (page 25). A MStartN
Sending from memory (Quick scan feature)
1. Set the original (page 25).
2. Enter the fax number. A MQuick ScanN
58
MStartN
8.2 Sending a fax using one-touch
dial feature and phonebook
Before using this feature, store the desired names and
telephone numbers into the one-touch dial feature and
phonebook (page 51).
R Make sure that the MFaxN light is ON.
8.2.1 Using the scanner glass
1
Set the original (page 25).
2
If necessary, change the resolution (page 57) and the
contrast (page 57).
3
Enter the fax number.
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press MLowerN, then press the desired station key.
Using phonebook:
Press MPhonebookN, then press MCN or MDN
repeatedly to display the desired item.
4
Press MStartN to scan the document into memory.
Wait until "SCAN:PRESS SET" "SEND:PRESS
START" is displayed.
R To send a single page, go to step 6.
R To send multiple pages, go to the next step.
5
Place the next page. A MSetN
R To send more pages, repeat this step.
6
MStartN
To search for a name by initial
Example: "LISA"
1. MPhonebookN
2. Press MCN or MDN to initiate the phonebook.
3. Press M5N repeatedly to display any name with the
initial "L" (see page 106 for character entry).
R To search for symbols, press M1N.
4. Press MCN or MDN repeatedly to display "LISA".
R To stop the search, press MStopN.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 1 time.
Note:
R To stop sending, see page 108.
8.2.2 Using the automatic document feeder
1
Set the original (page 25).
2
If necessary, change the resolution (page 57) and the
contrast (page 57).