Onboard Devices Configuration - Asus K8V User Manual

Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the
legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [FullSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full
Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed]

2.4.3 Onboard Devices Configuration

Onboard AC'97 Audio
OnChip SATA BOOTROM
OnBoard Promise Controller
Promise Boot ROM
OnBoard LAN
OnBoard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
OnBoard Game Port
OnBoard MIDI Port
OnBoard AC'97 Audio [Enabled]
[Auto] allows the BIOS to detect whether you are using any audio device. If an
audio device is detected, the onboard audio controller is enabled; if no audio
device is detected, the controller is disabled.
Configuration options: [Disabled] [Enabled]
OnChip SATA Boot ROM [Enabled]
Allows you to enable or disable the onchip Serial ATA boot ROM.
Configuration options: [Disabled] [Enabled]
OnBoard Promise Controller [Enabled]
Allows you to enable or disable the onboard Promise RAID controller.
Configuration options: [Disabled] [Enabled]
Promise Boot ROM [Enabled]
Enables or disables the Promise Boot ROM.
Configuration options: [Disabled] [Enabled]
ASUS K8V Motherboard
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[Disabled]
[Disabled]
[Disabled]
2-21