Asus K8N4-E DELUXE User Manual page 153

A new set of navigation keys is displayed on the bottom of the
screen.
2. Press <R> to rebuild a RAID array. The following screen appears.
RAID Mode: Mirroring
Striping Width: 1
Adapt Channel
2 1
1 0
3. Use the up or down arrow keys to select a RAID array to rebuild, then
press <F7>. The following confirmation message appears.
4. Press <Enter> to start rebuilding array or press <Esc> to cancel.
5. After the rebuild process, the Array list menu appears.
A S U S K 8 N 4 - E D e l u x e A S U S K 8 N 4 - E D e l u x e
A S U S K 8 N 4 - E D e l u x e A S U S K 8 N 4 - E D e l u x e A S U S K 8 N 4 - E D e l u x e
Array 1 : NVIDIA MIRROR
- Select Disk Inside Array -
Striping Block: 64K
M/S Index Disk Model Name
Master 0 XXXXXXXXXXXXXXXXX
Master 1 XXXXXXXXXXXXXXXXX
[ ] Select [F6] Back
Rebuild array?
[ENTER] OK [ESC] Cancel
XXX.XXG
Capacity
XXX.XXGB
XXX.XXGB
[F7] Finish
5 - 3 7 5 - 3 7
5 - 3 7 5 - 3 7 5 - 3 7