Asus K8N4-E DELUXE User Manual page 110

Boot Up Floppy Seek [Disabled] Boot Up Floppy Seek [Disabled]
Boot Up Floppy Seek [Disabled] Boot Up Floppy Seek [Disabled] Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled,
clears the chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On] Bootup Num-Lock [On] Bootup Num-Lock [On]
Bootup Num-Lock [On] Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled] Typematic Rate Setting [Disabled] Typematic Rate Setting [Disabled] Typematic Rate Setting [Disabled] Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the
T y p e m a t i c R a t e ( C h a r s / S e c ) and the T y p e m a t i c D e l a y ( M s e c ) T y p e m a t i c R a t e ( C h a r s / S e c ) T y p e m a t i c R a t e ( C h a r s / S e c )
T y p e m a t i c R a t e ( C h a r s / S e c ) T y p e m a t i c R a t e ( C h a r s / S e c )
Configuration options: [Disabled] [Enabled]
The items T y p e m a t i c R a t e ( C h a r s / S e c )
( M s e c ) ( M s e c )
( M s e c ) becomes user-configurable only when the item Typematic Rate ( M s e c ) ( M s e c )
Setting is enabled.
Typematic Rate (Chars/Sec) [6] Typematic Rate (Chars/Sec) [6]
Typematic Rate (Chars/Sec) [6] Typematic Rate (Chars/Sec) [6] Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a
key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250] Typematic Delay (Msec) [250]
Typematic Delay (Msec) [250] Typematic Delay (Msec) [250] Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
OS Select for DRAM > 64MB [Non-OS2] OS Select for DRAM > 64MB [Non-OS2] OS Select for DRAM > 64MB [Non-OS2] OS Select for DRAM > 64MB [Non-OS2] OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating
system with an installed RAM of greater than 64 KB.
Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled] Full Screen LOGO [Enabled]
Full Screen LOGO [Enabled] Full Screen LOGO [Enabled] Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
•
•
Halt On [All Errors] Halt On [All Errors]
Halt On [All Errors] Halt On [All Errors] Halt On [All Errors]
Allows you to error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard]
[All, But Diskette] [All, But Disk/Key]
4 - 4 4 4 - 4 4
4 - 4 4 4 - 4 4 4 - 4 4
T y p e m a t i c R a t e ( C h a r s / S e c ) T y p e m a t i c R a t e ( C h a r s / S e c )
T y p e m a t i c R a t e ( C h a r s / S e c ) and T y p e m a t i c D e l a y T y p e m a t i c R a t e ( C h a r s / S e c )
Make sure that the above item is set to [Enabled] if you want to use
the ASUS MyLogo2™ feature.
See section "5.3.1 ASUS MyLogo2™" for details.
T y p e m a t i c D e l a y ( M s e c ). T y p e m a t i c D e l a y ( M s e c ) T y p e m a t i c D e l a y ( M s e c )
T y p e m a t i c D e l a y ( M s e c )
T y p e m a t i c D e l a y T y p e m a t i c D e l a y
T y p e m a t i c D e l a y T y p e m a t i c D e l a y
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p