Asus K8N4-E DELUXE User Manual page 104

K8n4-e deluxe user's manual for english version e2009
Table of Contents

Advertisement

Power On by External Modems [Disabled]
Power On by External Modems [Disabled]
Power On by External Modems [Disabled]
Power On by External Modems [Disabled]
Power On by External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
aplications are fully running. Thus, connectino cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power-On By Alarm [Disabled]
Power-On By Alarm [Disabled]
Power-On By Alarm [Disabled]
Power-On By Alarm [Disabled]
Power-On By Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items Date of Month Alarm and Time (hh:mm:ss)
Alarm items become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
The two succeeding items become configurable only when the
P o w e r - O n B y R T C A l a r m
P o w e r - O n B y R T C A l a r m
P o w e r - O n B y R T C A l a r m
P o w e r - O n B y R T C A l a r m item is set to [Enabled].
P o w e r - O n B y R T C A l a r m
Day of Month Alarm [0]
Day of Month Alarm [0]
Day of Month Alarm [0]
Day of Month Alarm [0]
Day of Month Alarm [0]
To set the date of alarm, highlight this item and press <Enter> to display
the Day of Month Alarm pop-up menu. Key-in a value within the specified
range then press <Enter>. Configuration options: [Min=0] [Max=31]
Time (hh:mm:ss) Alarm [0:0:0]
Time (hh:mm:ss) Alarm [0:0:0]
Time (hh:mm:ss) Alarm [0:0:0]
Time (hh:mm:ss) Alarm [0:0:0]
Time (hh:mm:ss) Alarm [0:0:0]
To set the time of alarm:
1.
Highlight this item and press <Enter> to display a pop-up menu for the
hour field.
2.
Key-in a value (Min=0, Max=23), then press <Enter>.
3.
Press <TAB> to move to the minutes field then press <Enter>.
4.
Key-in a minute value (Min=0, Max=59), then press <Enter>.
5.
Press <TAB> to move to the seconds field then press <Enter>.
6.
Key-in a value (Min=0, Max=59), then press <Enter>.
4 - 3 8
4 - 3 8
4 - 3 8
4 - 3 8
4 - 3 8
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p

Advertisement

Chapters

Table of Contents
loading

Table of Contents