Connecting To Your Wireless Network - Epson C11CA30201 - Artisan 700 Photo All-in-One Printer Function Manual

Connecting to Your Wireless Network

To add the printer to your wireless network, you need to know the name (SSID)
of your wireless network. If it has security enabled, you also need to know the
security mode and WEP key or WPA passphrase. Enter your network and security
information in the space provided below:
Network name (SSID): ____________________________________________
Security mode (select one):
❑
None
❑
WEP-64, ASCII
❑
WEP-64, Hexadecimal
❑
WEP-128, ASCII
❑
WEP-128, Hexadecimal
❑
WPA-PSK (TKIP)
❑
WPA-PSK (AES)
WEP key or WPA passphrase: _______________________________________
Note:
The printer supports the following wireless security modes: WEP-64, WEP-128, and
WPA-PSK.
If your WEP key is 5 or 13 characters, it's ASCII. If it's 10 or 26 characters, it's
hexadecimal.
If your WPA passphrase contains upper- or lowercase letters, be sure to note them
correctly.
If your wireless network uses WPA as the security mode, you will also need to know
whether it's using TKIP or AES as the encryption algorithm.
If you don't know your wireless network name (SSID) or security settings, contact the
person who set up your wireless network.
Connecting to Your Wireless Network
3