Bios Menu Screen - Asus F1A55-M LX3 PLUS R2.0 User Manual

BIOS menu screen

The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ
Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.7 Boot menu for details.
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output, CPU/chassis
fan speed
EFI BIOS Utility - EZ Mode
Tuesday [1/1/2008]
Temperature
CPU +113.0ºF/+45.0ºC
MB +75.2ºF/+40.0ºC
Q-Fan Control
Quiet
Performance
Boot Priority
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
The boot device options vary depending on the devices you installed to the system.
Chapter 2: BIOS information
Selects the display language of
the BIOS setup program
F1A55-M LX3 PLUS R2.0
BIOS Version : 0401
CPU Type : AMD Engineering Sample
Total Memory : 1024 MB (DDR3 1333MHz)
Voltage
CPU 1.248V 5V
3.3V 3.344V 12V
Energy Saving
Normal
Silent mode
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Build Date : 05/02/2012
Speed : 2400 MHz
Fan Speed
5.160V CPU_FAN 3325RPM
12.248V
Loads optimized default
Standard mode
Clicks to display all fan
speeds if available
Exit/Advanced Mode
English
CHA_FAN N/A
Default(F5)
Turbo mode
2-7