Vcore Transient Test(Dos Mode) - Biostar M7 SUA Engineering Validation Test Report

M7sua compatibility test report

Hide thumbs Also See for M7 SUA:

Table of Contents

Vcore Transient Test(Dos Mode)

CPU

Athlon_xp_2600+

M\B

SUA 6.0

CH 1

Vcore

CH 2

STPCLK

Condition

1.Boot the system to the Win98SE environment(Command Prompt Only)

Dos mode and run the stpclk.bat

2.At the main menu ,type Enter & Enter & "Y" to go to the "menu"

3.At the next menu , select "Power Management Utilities"

4.At this menu , select "Throttle Ratio" and set at the rang of 50.0%~56.0%

and set " Enable " of " ON"

5.Press <ESC> tiwce and then "Y" to exit the stpclk.bat program

6.Measure the Vcore waveform

Vcore Transient waveform

RESULT PASS

Table of Contents

M7vkq pro