Extreme Tweaker Menu; Cpu Level Up - Asus CROSSHAIR IV EXTREME User Manual

3.3

Extreme Tweaker menu

The Extreme Tweaker menu items allow you to configure overclocking-related
items.
Take caution when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
Extreme Tweaker
Configure System Performance Settings
Target CPU Frequency: 3100MHZ
Target DRAM Frequency: 1067MHZ

CPU Level Up

-------------------------------------------------
OC Tuner Utility
AI Overclock Tuner
CPU Ratio
DRAM Frequency
CPU/NB Frequency
HT Link Speed
DRAM Timing Configuration
DRAM Driving Configuration
******** Please key in numbers directly! ********
CPU & NB Voltage Mode
CPU Offset Voltage
CPU/NB Offset Voltage
CPU VDDA Voltage
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Scroll down to display the following items:
DRAM Voltage
HT Voltage
NB Voltage
NB 1.8V Voltage
SB Voltage
VDDR Voltage
VDDPCIE Voltage
DRAM CTRL REF Voltage
DRAM DATA REF Voltage
***********************************************
CPU Load-Line Calibration
CPU/NB Load-Line Calibration
CPU Spread Spectrum
PCIE Spread Spectrum
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
3.3.1 CPU Level Up [Auto]
Allows you to select a CPU level, and the related parameters will be automatically
adjusted according to the selected CPU level.
• The configuration options vary depending on the CPU model you install on
the motherboard.
• The CPU Level UP function support depends on CPU types.
ROG Crosshair IV Formula
Crosshair IV Formula BIOS Setup
Main Advanced
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Offset]
1.303 [Auto]
1.164 [Auto] [Auto]
2.474 [Auto]
1.488 [Auto]
1.191 [Auto]
1.098 [Auto]
1.802 [Auto]
1.111 [Auto]
1.205 [Auto]
1.113 [Auto]
0.500 [Auto]
0.500 [Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Power Boot Tools
OC tuner automatically
overclocks CPU and
DRAM frequency and
voltage.
Press ENTER to start
tuning.
(takes about 5 mins)
←→
↑↓
Enter Go to Sub Screen
F1
F10
ESC
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit
3-9