Using Asus Turbov Auto Tuning Mode - Asus CROSSHAIR IV EXTREME User Manual

Using ASUS TurboV Auto Tuning Mode

The Auto Tuning Mode allows smart auto-overclocking. Follow the instructions
below to let TurboV EVO detect and overclock your system.
1. Click the Auto Tuning tab and
then click Start. You can also click
More Setting first to configure more
overclocking parameters before
starting auto-overclocking.
2. Read through the warning messages
and click Yes to start auto-
overclocking.
3. An animation appears indicating the
overclocking process. Click Stop
if you want to cancel the current
Overclocking process.
•
•
•
•
•
4-24
After pressing Start, the system starts performance tuning and may reboot
2 to 3 times. Please do not operate or manually restart the computer during
the tuning process.
After restarting OS, a message appears indicating the current overclocking
result. You can click Stop to save the current overclocking setting, or wait
for TurboV EVO to continue system tuning for higher system performance.
The auto-tuned system performance varies on the installed device (ex.,
CPU and DRAM).
The auto-tuning function overclocks your system settings. Installation of
advanced cooling systems is recommended.
The auto-tuned settings will be stored in system BIOS and will be applied in
the next boot.
Chapter 4: Software support