Tools Menu; Exit Menu - Asus AT5NM10T-I NA User Manual

The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.7

Tools menu

The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the sub-menu.
Main Advanced
ASUS EZ Flash 2
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. See section 2.1.2 ASUS EZ Flash 2 for details.
2.8

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main Advanced
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
ASUS AT5NM10T-I
AT5NM10T-I BIOS Setup
Power Boot Tools
AT5NM10T-I BIOS Setup
Power Boot
Exit
Press ENTER to run the
utility to select and
update BIOS.
This utility supports
1.FAT 12/16/32(r/w)
2.NTFS(read only)
3.CD-DISC(read only)
Tools Exit
Exit system setup
Exit system setup
after saving the
after saving the
changes.
changes.
F10 key can be used
F10 key can be used
for this operation.
for this operation.
+-
Enter Go to Sub-screen
F1
F1
F10
F10
ESC
ESC
Version 0306
Version 0306
Select Screen
Select Screen
Select Item
Select Item
Change Option
General Help
General Help
Save and Exit
Save and Exit
Exit
Exit
2-14