Tools Menu; Asus Ez Flash 2; Ai Net2; Exit Menu - Asus AT3GC-I - Motherboard - Mini ITX User Manual

2.7

Tools menu

Main Advanced
Tools Settings

ASUS EZ Flash 2

AI NET2

2.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <OK>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <OK> to
confirm your choice.
2.7.2 AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
2.8

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
2-15
BIOS SETUP UTILITY
Power Boot Tools Exit
Press ENTER to run the
utility to select and
update BIOS.
This utility supports :
1. FAT 12/16/32 (r/w)
2. NTFS (read only)
Exit system setup
after saving the
changes.
F10 key can be
used for this
operation.
ASUS AT3GC-I