Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Asus AAEON UP Squared UPS-APL
Summary of Contents for Asus AAEON UP Squared UPS-APL
- Page 1 UP Squared Maker Board UPS-APL User’s Manual 5 Last Updated: July 16, 2020...
- Page 2 Copyright Notice This document is copyrighted, 2020. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
- Page 3 Acknowledgement All other products’ name or trademarks are properties of their respective owners. Microsoft®, Windows® are registered trademarks of Microsoft Corp. ⚫ Intel®, Pentium®, and Celeron® are registered trademarks of Intel Corporation ⚫ Intel Atom™ is a trademark of Intel Corporation ⚫...
- Page 4 Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity UPS-APL (UP Squared Board) ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
- Page 5 About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
- Page 6 Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
- Page 7 If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
- Page 8 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
- Page 9 China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ○ ○ ○ ○ ○ ○ 及其电子组件 外部信号 ○ ○ ○ ○ ○ ○ 连接器及线材...
- Page 10 China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Main Board/ Daughter Board/ Backplane Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
-
Page 11: Table Of Contents
Table of Contents Chapter 1 - Product Specifications..................1 Specifications ......................2 Chapter 2 – Hardware Information ..................4 Dimensions ....................... 5 Jumpers and Connectors ..................7 List of Jumpers and Connectors ................9 2.3.1 RTC Battery (CN1) ..................10 2.3.2 Power Button (CN2) ................... - Page 12 2.3.21 HDMI Dual Port (CN24) ................23 Chapter 3 – Drivers Installation .................... 25 Driver Download and Installation............... 26 Appendix A – UP Framework SDK Installation ..............27 Introduction ......................28 Installation for Windows 10.................. 28 Installation for Windows IoT Core ............... 31 Appendix B –...
-
Page 13: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications... -
Page 14: Specifications
Specifications System Processor Intel® processor SoC formerly Apollo Lake Intel® Pentium® N4200 Intel® Celeron® N3350 Intel® Atom™ E3940/ E3950 CPU Frequency Intel® Celeron™ N3350 Processor, 2M Cache, 1.10 GHz up to 2.40 GHz Intel® Pentium™ N4200 Processor, 2M Cache, 1.10 GHz up to 2.50 GHz Intel®... - Page 15 System Power 5V DC-in at 4A ~ 6A Dimension 3.37" x 3.54" (85.6 mm × 90 mm) Memory 2GB (single channel) LPDDR4 4GB/8GB (dual channel) LPDDR4 Storage eMMC 32/ 64/ 128 GB Display Interface Ethernet Gigabit Ethernet RJ-45 x 2 OS Support Microsoft Windows 10, Windows IOT Core Linux (ubilinux, Ubuntu, Yocto)
-
Page 16: Chapter 2 - Hardware Information
Chapter 2 – Hardware Information Chapter 2... -
Page 17: Dimensions
Dimensions Chapter 2 – Hardware Information... - Page 18 With Heatsink Chapter 2 – Hardware Information...
-
Page 19: Jumpers And Connectors
Jumpers and Connectors Top: Chapter 2 – Hardware Information... - Page 20 Bottom: Chapter 2 – Hardware Information...
-
Page 21: List Of Jumpers And Connectors
List of Jumpers and Connectors Please refer to the table below for all of the board’s jumpers that you can configure for your application Label Function Power Button Reset Camera 4-Lane Camera 2-Lane M.2 E-Key Mini Card SATA CN10 SATA Power CN13 USB3.0 OTG CN14... -
Page 22: Rtc Battery (Cn1)
2.3.1 RTC Battery (CN1) Signal 3.3V Note: Vbat RTC only accessible from CN1. 2.3.2 Power Button (CN2) Signal PWRBTN # Chapter 2 – Hardware Information... -
Page 23: Reset (Cn3)
2.3.3 Reset (CN3) Signal RESET # 2.3.4 Camera 4-Lane (CN4) Signal Signal Signal RESET # I2C_DAT I2C_CLK CLOCK data negative 0 data positive 0 data negative 1 data positive 1 clock negative clock positive data negative 2 data positive 2 data negative 3 data positive 3 2.8V... -
Page 24: Camera 2-Lane (Cn5)
2.3.5 Camera 2-Lane (CN5) Signal Signal Signal data negative 1 data positive 1 clock negative clock positive data negative 0 data positive 0 1.2V 1.8V CLOCK I2C_CLK I2C_DAT RESET # RESET # 2.8V 2.3.6 eDP (CN6) Signal Signal Signal data positive 0 data negative 0 data positive 1 data negative 1... -
Page 25: E-Key (Cn7)
Signal Signal Signal data positive 2 data negative 2 data positive 3 data negative 3 AUX positive AUX negative Hot Plug Detect Back Light Control VDD Enable Back Light Enable I2C_CLK I2C_DAT 3.3V 3.3V 3.3V 3.3V 3.3V 2.3.7 M.2 E-KEY (CN7) Signal Signal Signal... -
Page 26: Mini Card (Cn8)
Signal Signal Signal PCIE_RXP3 PCIE_RXN3 CLK_PCIE_M2_P CLK_PCIE_M2_N Suspend Clock RESET # PCIE_M2_CLKREQ# Bluetooth Enable WAKE # Wi-Fi Enable SMBus_DAT SMBus_CLK SMBus_Alert 3.3V 3.3V 2.3.8 Mini Card (CN8) Signal Signal WAKE # 3.3V INT_SERIRQ 1.5V PCIE_MINI_CLKREQ# CLK_PCIE_MINI_N CLK_PCIE_MINI_P Chapter 2 – Hardware Information... -
Page 27: Sata (Cn9)
Signal Signal 3G Enable RESET # PERn0_mSATA_R+ 3.3V PERp0_mSATA_R- 1.5V I2C_CLK PETn0_mSATA_T- I2C_DAT PETp0_mSATA_T+ USB_D- USB_D+ 3.3V 3.3V mSATA_PCIe_SEL_C 1.5V 3.3V 2.3.9 SATA (CN9) Signal Signal Signal Chapter 2 – Hardware Information... -
Page 28: Sata (Cn10)
2.3.10 SATA (CN10) Signal 5V/2A 2.3.11 USB 3.0 OTG (CN13) Signal Signal Signal USB2_D- USB2_D+ USB3_RX- RSB3_RX+ USB3_TX- USB3_TX+ 2.3.12 USB 3.0 DUAL PORT (CN14) Signal Signal Signal USB2_D1- USB2_D1+ USB3_RX1- USB3_RX1+ USB3_TX1- USB3_TX1+ Chapter 2 – Hardware Information... -
Page 29: Usb 3.0 (Cn15)
Signal Signal Signal USB2_D2- USB2_D2+ USB3_RX2- USB3_RX2+ USB3_TX2- USB3_TX2+ 2.3.13 USB 3.0 (CN15) Signal Signal Signal USB2_D- USB2_D+ USB3_RX- USB3_RX+ USB3_TX- USB3_TX+ 2.3.14 USB Panel (CN16) Signal Signal USB2_D1- USB2_D1+ USB2_D2- USB2_D2+ UART_RX (3V3 TTL) UART_TX (3V3 TTL) Chapter 2 – Hardware Information... -
Page 30: Fan (Cn17)
2.3.15 FAN (CN17) Signal Signal 2.3.16 LAN Dual Port (CN18) Signal Signal LAN1_MDI0+ LAN1_MDI0- LAN1_MDI1+ LAN1_MDI1- LAN1_MDI2+ LAN1_MDI2- LAN1_MDI3+ LAN1_MDI3- R10A LAN1_ACTLED- LAN1_ACTLED+ LAN1_LINK1000# LAN1_LINK100# LAN2_MDI0+ LAN2_MDI0- LAN2_MDI1+ LAN2_MDI1- LAN2_MDI2+ LAN2_MDI2- LAN2_MDI3+ LAN2_MDI3- R10B LAN2_ACTLED- LAN2_ACTLED+ LAN2_LINK1000# LAN2_LINK100# Chapter 2 – Hardware Information... -
Page 31: Hat 40 (Cn20)
2.3.17 HAT 40 (CN20) Signal BIOS 3V3/1A 5V/1A GPIO0/I2C1_SDA GPIO1 5V/1A GPIO1/I2C1_SCL GPIO2 GPIO2/ADC_in1 GPIO3 GPIO15/UART_TXD GPIO16 GPIO16/UART_RXD GPIO17 GPIO3/UART_RTS/ADC_in2 GPIO4 GPIO17/I2S_BCLK GPIO18 GPIO4/ADC_in3 GPIO5 GPIO5/ADC_in4 GPIO6 GPIO18 GPIO19 3V3/1A GPIO19 GPIO20 GPIO6/SPI_1_TXD GPIO7 GPIO7/SPI_1_RXD GPIO8 GPIO20 GPIO21 GPIO8/SPI_1_CLK GPIO9 Chapter 2 –... - Page 32 Signal BIOS GPIO21/SPI_1_FS0 GPIO22 GPIO22/SPI_1_FS1 GPIO23 GPIO9/I2C0_SDA GPIO10 GPIO23/I2C0_SCL GPIO24 GPIO10 GPIO11 GPIO11 GPIO12 GPIO24/PWM0 GPIO25 GPIO12/PWM1 GPIO13 GPIO13/I2S_WS_SYNC GPIO14 GPIO25/UART_CTS GPIO26 GPIO14 GPIO15 GPIO26/I2S_SDI GPIO27 GPIO27/I2S_SDO GPIO28 Note: All GPIO pins are 3V3. Chapter 2 – Hardware Information...
-
Page 33: Exhat (Cn21)
2.3.18 EXHAT (CN21) Signal Signal GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 GPIO16 PLL_IN- PLL1_OUT- PLL1_IN+ PLL1_OUT+ INT_SERIRQ_R LPC_R_CLKOUT0 LPC_CLKRU_N LPC_R_AD3 SIO_SPI_1_TXD LPC_R_AD2 SIO_SPI_1_RXD LPC_R_AD1 SIO_SPI_1_FS0 LPC_R_AD0 Chapter 2 – Hardware Information... -
Page 34: Cpld And Bios Update (Cn22)
Signal Signal SIO_SPI_1_FS1 SIO_SPI_1_CLK LPC_FRAME_R I2C_SCL3_3V3 AVS_DMIC_CLK_A1 I2C_SDA3_3V3 AVS_DMIC_CLK_B1 AVS_DMIC_CLK_AB2 I2C_SCL2_3V3 I2C_SDA2_3V3 AVS_DMIC_DATA_1 AVS_DMIC_DATA_2 2.3.19 CPLD and BIOS update (CN22) Signal Signal Signal JTAG_TCK JTAG_TDO 1.8V JTAG_TMS SPI_CS SPI_CLK SPI_MISO JTAG_TDI SPI_MOSI SPI_HOLD Chapter 2 – Hardware Information... -
Page 35: Cpld And Bios Update (Cn22)
2.3.20 CPLD and BIOS update (CN22) Signal Signal Signal 2.3.21 HDMI Dual Port (CN24) Signal Signal DDI0_TXP_DP_0 DDI0_TXN_DP_0 DDI0_TXP_DP_1 DDI0_TXN_DP_1 DDI0_TXP_DP_2 DDI0_TXN_DP_2 PORT0_CLK+ PORT0_CLK- CONFIG1 CONFIG2 DP_AUX_P DP_AUX_N DDI0_TYPE_C_HPD 3.3V DDI1_TXP_HDMI_0 DDI1_TXN_HDMI_0 DDI1_TXP_HDMI_1 DDI1_TXN_HDMI_1 Chapter 2 – Hardware Information... - Page 36 Signal Signal DDI1_TXP_HDMI_2 DDI1_TXN_HDMI_2 DDI1_CLK+_HDMI DDI1_CLK-_HDMI HDMI1_CEC_D DDC_CLK DDC_DATA DDI1_TYPE_C_HPD Chapter 2 – Hardware Information...
-
Page 37: Chapter 3 - Drivers Installation
Chapter 3 Chapter 3 – Drivers Installation... -
Page 38: Driver Download And Installation
Driver Download and Installation Please access https://www.up-community.org and go to the Downloads section > UP Squared to find the relevant drivers. Chapter 3 – Drivers Installation... -
Page 39: Appendix A - Up Framework Sdk Installation
Appendix A Appendix A – UP Framework SDK Installation... -
Page 40: Introduction
Introduction This section provides instructions for the installation of the UP Framework SDK. Instructions are provided for Windows 10 and Windows IoT Core. You can download the latest version of UP Framework SDK from the UP community: https://downloads.up-community.org/download/up-sdk-for-windows-10-and-windows-iot/ A.2 Installation for Windows 10 Step 1 Locate the downloaded file UpFrameworkSetup.msi and run the installer. - Page 41 Step 2 Select the installation folder. Default destination path is C:\Program Files(x86)\AAEON\ You may also choose to install the UP Framework SDK for all users or only the current user. Press “Next” to continue installation. Step 3 Press “Next” to confirm the installation. Appendix A –...
- Page 42 Step 4 Press “Close” to exit once setup is complete. Appendix A – UP Framework SDK Installation...
-
Page 43: A.3 Installation For Windows Iot Core
A.3 Installation for Windows IoT Core Before you begin, make sure you have downloaded and installed the latest version of the Windows IoT Core image from the UP community. Installation requires using a connected PC with the UP Framework SDK software downloaded and saved. - Page 44 Step 2 Download the UP Framework SDK to your PC and unzip the files. Open PowerShell as an Administrator. Run the command RemoteInstallation.ps1 to install the UP Framework SDK. Enter the IP address of the UP IoT Core device when prompted. Appendix A –...
-
Page 45: Appendix B - Cables And Connectors
Appendix B Appendix B – Cables and Connectors... -
Page 46: Cables And Connectors
Cables and Connectors This table provides detailed information about the cables and connectors used by the UP Squared (UPS-APL). If you have any questions about the configuration of your board, please contact your AAEON sales representative. Mating Label Connector PN Description Mating Cable Description Cable PN... - Page 47 Mating Label Connector PN Description Mating Cable Description Cable PN CN21 1654006000 60-pin EXHAT connector N/A CN23 1652503109 5V DC Jack CN24 1654403931 HDMI 2.0 + DP 1.2 1601000990 Power Button Appendix B – Cables and Connectors...
Need help?
Do you have a question about the AAEON UP Squared UPS-APL and is the answer not in the manual?
Questions and answers