Amd Cool ʻN Quiet Configuration - Asus A8S-X User Manual

Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you installed a Plug & Play operating system, the operating
system configures the Plug & Play devices not required for boot.
Configuration options: [No] [Yes]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device
latency timer register. Configuration options: [32] [64] [96] [128] [160]
[192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card
requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the
PCI VGA card even if requested. Configuration options: [Yes] [No]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
2.4.7 AMD Cool ʻN Quiet Configuration
AMD Cool 'N Quiet Configuration
Cool N'Quiet
Cool ʻN Quiet [Disabled]
Enables or disables the ASUS AMD Cool ʻnʼ Quiet! technology feature.
Configuration options: [Enabled] [Disabled]
2-22
[Enabled]
Enabled/Disabled Cool
N'Quiet
Chapter 2: BIOS Setup