Set User Password - Gigabyte GA-6TXSL User Manual

Set User Password

You can only enter but do not have the right to change the options of the setup menus.
When you select this function, the following message will appear at the center of the screen
to assist you in creating a password.
Type the password up to 6 characters in lengh and press <Enter>. The password typed now
will clear any previously entered password from the CMOS memory. You will be asked to
confirm the entered password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a specified password.
Password on boot
Password entering will be required when system on boot.
Enabled
Disabled
Requries entering password when system on boot.
Disable this function. (Default setting)
51
BIOS Setup