Floppy Disk Controller; Legacy Diskette A - Gigabyte GA-6TXSL User Manual

GA-6TXSL-RH Motherboard
2F8/IRQ3
3E8/IRQ7
2E8/IRQ5
3E8/IRQ7
2E8/IRQ5
NumLock
On
Disabled Disable NumLock function.
Mode
This option allows user to set Parallel Port transfer mode.
EPP Using
Bi-directional
ECP Using
Base I/O Address
378
289
3BC
Interrupt
IRQ5
IRQ7

Floppy disk controller

Enabled Enable Floppy disk controller function. (Default setting)
Disabled Disable Floppy disk controller function.

Legacy Diskette A

Enabled Enable Legacy Diskette A function. (Default setting)
Disabled Disable Legacy Diskette A function.
Set IO address to 2F8/IRQ3. (Default setting)
Set IO address to 3E8/IRQ7.
Set IO address to 2E8/IRQ5.
Set IO address to 3E8/IRQ7.
Set IO address to 2E8/IRQ5.
Enable NumLock function. (Default setting)
Parallel port as Enhanced Parallel Port.
Use this setting to support bi-directional transfers on the parallel
port. (Default setting)
Parallel port as Extended Capabilities Port.
Set IO address to 378. (Default setting)
Set IO address to 27
Set IO address to 3BC
Set the Interrupt to IRQ5.
Set the Interrupt to IRQ7. (Default setting)
44