Asus A7VI-VM User Manual page 26

3. HARDWARE SETUP
3) Universal Serial BUS Ports 0 & 1 (Black two 4-pin USB)
Two USB ports are available for connecting USB devices. If these are not enough,
a USB header is available for two additional USB port connectors. See USB
Headers later in this section.
USB 1
Universal Serial Bus (USB) 2
4) Serial Port Connectors (Teal/Turquoise 9-pin COM1)
One serial port can be used for pointing devices or other serial devices. For
setting up these ports, see Onboard Serial Port 1 in 4.4.2 I/O Device Configu-
ration for settings.
5) Monitor Output Connector (Blue 15-pin VGA)
This connector is for output to a VGA-compatible device.
26
COM 1
Serial Port (9-pin male)
VGA Monitor (15-pin female)
ASUS A7VI-VM User's Manual