Asus A7VI-VM User Manual page 17

3. HARDWARE SETUP
Motherboard Features Settings (DIP Switches - SW1)
The motherboard's onboard functions are adjusted through the DIP switches. The
white block represents the switch's position. The example below shows all the
switches in the OFF position.
A7VI-VM
®
A7VI-VM DIP Switches
1) Jumper Setting (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Jumper Setting
JumperFree™
Jumper Mode
In JumperFree™ mode, DIP switches (SW1) must be set as shown:
(ON: 1,2,4; OFF: 3)
A7VI-VM
®
A7VI-VM JumperFree™ Mode Setting
ASUS A7VI-VM User's Manual
DSW
ON OFF
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
JEN
[2-3] (default)
[1-2]
1 2
Jumper Mode
DSW
JEN
2
3
JumperFree
(default)
17