Asus A7V600-X User Manual page 27

3. Clear RTC RAM (CLRTC)
These jumpers allow you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup parameters
by erasing the CMOS RTC RAM data. The RAM data in CMOS is powered by
the onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Move the jumper cap to pin [1-2] to clear CMOS then replace the jumper
cap back to pin [2-3] after 3 seconds.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
A7V600-X
®
A7V600-X Clear RTC RAM
4. V over-voltage (3-pin OVER_VOLT1)
CORE
When enabled, this jumper allows CPU V
When this jumper is disabled, V
You may adjust the CPU V
Setting to a very high core voltage may cause permanent damage to the CPU.
It is recommended that you keep the default setting (Disable).
A7V600-X
®
A7V600-X OVER_VOLT Setting
ASUS A7V600-X Motherboard
CLRTC
2
1
Clear CMOS
ranges of 1.7V to 2.05V.
CORE
setting has a range of +1.5V to +1.85V.
CORE
through the BIOS Setup.
CORE
OVER_VOLT1
1 2
Enable
3
2
Normal
(Default)
2 3
Disable
(Default)
1-17