Asus A7V600 Technical Update

A7V600 Technical Updates
3.4.2 Entering VIA
1. Boot-up your computer.
2. During POST, press <Del> to enter the BIOS setup utility.
3. From the BIOS setup, select Advanced -> PCI Configuration ->
Onboard ATA Device First. See page 2-22.
4. Set the Onboard ATA Device First field to [Yes]. Save settings and
exit.
5. During POST, press <Tab> to enter VIA RAID configuration utility.
The following menu options will appear.
The RAID BIOS information on the setup screen shown is for reference only.
What you see on your screen may not be exactly the same as shown.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Channel
Serial_Ch0 Master
Serial_Ch1 Master
On the upper-right side of the screen is the message and legend box. The keys on
the legend box allows you to navigate through the setup menu options. The
message describes the function of each menu item. The following lists the keys
found in the legend box with their corresponding functions.
F1 :
View Array/Disk Status
, :
Move to the next item
Enter :
Confirm the selection
ESC :
Exit
ASUS A7V600 Technical Updates
®
Tech RAID BIOS Utility
VIA Tech. RAID BIOS Ver 1.XX
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1
,
Enter: Confirme the selection
ESC
Drive Name Array Name
XXXXXXXXXX
XXXXXXXXXX
(page 3-9)
: View Array/Disk Status
: Move to next item
: Exit
Mode Size(GB) Status
xxxxx xxx.xx Hdd
xxxxx xxx.xx Hdd
IE1372
1