Asus A7V600-X User Manual page 33

10. Serial ATA connector (7-pin SATA1, SATA2)
These connectors accommodate the primary serial ATA (SATA1) and a
secondary serial ATA (SATA2) cables. Connect the serial ATA cable to this
connector then install to a serial ATA ready hard disk.
A7V600-X
®
A7V600-X SATA Connectors
The SATA cable is purchased separately.
11. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
A7V600-X
®
A7V600-X System Panel Connectors
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (4-pin SPKR)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
ASUS A7V600-X Motherboard
SATA2 SATA1
Speaker
Connector
Power LED
Reset SW
IDE_LED
ATX Power
SMI Lead
Switch*
Requires an ATX power supply.
*
1-23