Audio - HP Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB Maintenance Manual

430524-001.book Page 15 Tuesday, May 2, 2006 2:05 PM

Audio

Question
My ringer is too loud or
too soft. How do I adjust
the ringer volume?
Why am I unable to dial
out or receive incoming
phone calls?
Why does the phone cut
off in the middle of phone
conversations?
Why is it hard to hear the
other caller whenever I
use my earbud headset
during calls?
How do I turn on the
speaker phone when I am
on a call?
How do I adjust the phone
and speakerphone volume
while on a call?
Why can't I hear sound
through the speakers, but I
can hear sound through
the earbud headset?
Why can't I hear the
sounds associated with
my games and other
software programs?
15
Answer
To adjust the ringer volume, tap the Volume icon top right
portion of the Today screen. Then adjust the right volume slider
accordingly.
•
Check to see if your SIM card is inserted in the HP iPAQ.
•
Make sure your wireless connection to your mobile service
provider is turned on and your device displays adequate
signal strength.
•
If the signal strength icon displays a diminished number or
no vertical bars, you may be in an area outside of your
phone network.
•
If you still cannot dial out or receive phone calls, and
performing a soft reset does not correct this situation please
contact your mobile service provider for help.
•
Be sure the battery on your HP iPAQ is fully charged.
•
Is the signal strength icon displaying a diminished number of
vertical bars in the icon? If so, you may be in an area outside
of the phone network.
The earbud headset sends sound directed out of the center of the
speaker; therefore, be sure that the earbud is inserted in your
ear so that it is sending the sound directly down the ear canal.
To start the speaker phone when you are on a call, press and
hold the Answer/Send button until the speaker phone turns
on. The speakerphone can also be accessed from Menu >
Turn Speakerphone on.
Use the volume slider on the top left side of your device to adjust
the volume during a call.
Make sure that your earbud headset is not plugged into the unit
when you want to listen via the speakers.
Make sure that you have set the volume levels high enough, so
you can hear sound. Tap the Volume icon on the top right
portion of the Today screen. Then adjust the left volume slider
accordingly.