Display - HP Hw6510 - iPAQ Mobile Messenger Smartphone 55 MB Maintenance Manual

430524-001.book Page 16 Tuesday, May 2, 2006 2:05 PM
Question
How can I quickly create
unique ring tones for my
HP iPAQ?
How do I set my device to
vibrate?
How do I prevent a call
from going to voice mail?
Why is the audio low from
the speaker phone?

Display

Question
Why does my HP iPAQ
turn off whenever I don't
use it for a few minutes?
Why can't I see anything
on the screen?
Answer
To make a unique ring tone for your device:
1.
Synchronize your device with your personal computer.
2.
Copy the sound file that you want to use as a ring tone to
your device in any of these formats.wav, .mid, or .wma.
3.
Tap Start > Programs > File Explorer.
4.
Locate the sound file that you copied to your device.
5.
Tap and hold the sound file that you want to use and tap Set
As Ringtone from the resulting drop-down menu.
If you cannot view or hear the media file, the file may be
protected by Digital Rights Management (DRM). DRM is
software that enables secure distribution and prevents illegal
distribution of pictures, videos, music, movies, and ring tones
over the Internet. For more information on DRM, refer to the
on-screen Help by tapping Start > Help and search on DRM.
Tap the Volume icon on the Volume icon on the top right
portion of the Today screen. Then select the Vibrate radio
button.
Incoming phone calls will automatically go to voice mail if you
do not answer the call before the selected interval has passed.
To allow for more time before calls go to voice mail, contact
your cellular provider to increase the amount of time before your
call will go to voice mail.
The speaker used for speaker phone functionality is located on
the back of your device. Audio quality is affected if your hand
covers the speaker.
Answer
Your HP iPAQ is actually going into Suspend mode. While it is
in Suspend mode, your device is conserving energy, but it is
still monitoring your mobile phone network and the screen turns
on again whenever you receive a phone call or a notification
appears.
•
Be sure the HP iPAQ is powered on.
•
Be sure the HP iPAQ battery is charged.
•
Be sure the HP iPAQ is connected to the AC Adapter and the
HP iPAQ Cradle.
•
Reset the device by using the stylus to lightly press the
Reset button.
•
Remove and replace the battery.
16