Dual XDVD700 Installation & Owner's Manual page 25

XDVD700 OPERATION
Screen Setup Menu
From the Screen Setup Menu, press Screen Saver. Touch On to activate the
Screen Saver
screen saver or Off to deactivate it.
From the Screen Setup Menu, press TS Calibrate. Touch Yes to enter Touch
Touch Screen Calibrate
Screen Calibration Mode. Follow the on-screen prompts to calibrate.
Note: For proper calibration you must touch each pointer for  seconds. If
pointers are not touched properly, the calibration sequence will start over until
the calibration is done correctly.
Displays the current version number of the software.
Version
4