Control Locations - Monitor Closed - Dual XDVD700 Installation & Owner's Manual

XDVD700

Control Locations - Monitor Closed

1 2
16
Monitor Notes:
• This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
not obstruct the dash, shifter or any other controls.
• Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN
buttons on the front panel only.
• The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
obstacle and press OPEN again to resume the monitor open/close sequence.
9
OPERATION
15 14
Band
1
Auto Store/Preset Scan
2
Secondary LCD
3
4 Display
5 Open/Close Monitor
6 Eject
7
Rotary Encoder/Enter
8
Mode
3
13 12 11 10
Play/Pause/Scan
9
Stop
10
Chapter/Track Up
11
12 Chapter/Track Down
13 Fast Forward
14 Fast Reverse
15 Mute
16 Power/Volume
4
9 8 7
5
6