Dual XDVD700 Installation & Owner's Manual page 17

Optional Mode Selection
Programmable Turn-on Volume
Audio Adjustment
(from front panel)
Audio Adjustment
(from Remote)
Mode Press MODE to select between TUNER, DVD and AUX IN inputs. Modes of
operation are indicated in the OSD (On Screen Display) and secondary LCD.
With the monitor open, press the top left corner of the screen to display the
OSD menu. Press TUNER, DVD or AUX IN icon to select the desired source.
Volume Adjust VOLUME using rotary encoder or the VOL   buttons.
Turn VOLUME rotary to desired listening level, press and hold VOLUME
rotary knob for 3 seconds to program currently selected volume level.
Mute
Press MUTE to silence the audio;
Press MUTE again to cancel.
Press in VOLUME rotary knob on left front panel,
Press in VOLUME again to advance to desired parameter to be changed,
Turn VOLUME rotary Q or P to adjust to desired level,
Press in VOLUME to advance to next selection,
Press and hold the VOLUME button on the front panel to exit.
L
Press the SEL button,
Press the   buttons on the remote to select an item to be adjusted,
Press  or  to adjust the desired setting,
Press the ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User" mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed on the
screen.
XDVD700 OPERATION
General Operation
will appear in the OSD.
ITEM
EQ
BASS
TREBLE
BALANCE
FADER
SUB
LOUD
RANGE
USER FLAT
JAZZ POP
CLASSICAL ROCK
NEWS URBAN
RAVE MOVIE
TECHNO
-7 +7
-7 +7
-9 +9
-9 +9
-7 +7
OFF ON
16