Advertisement
Please read entire manual before installation.
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
excessive vibration.
• Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
• DIN mounting procedure:
Install mounting sleeve into dash opening, bending tabs to secure.
• 2-Shaft mounting procedure:
Remove knobs, faceplate and DIN mounting adapters from unit.
Install unit into kit or dash opening from behind. Adjust rear shaft nuts to
correct depth. Install faceplate and knobs.
• Certain vehicles may require an installation kit and/or wiring harness
adapter (sold separately).
2
Advertisement
