Table of Contents
Advertisement
SECTION 5.0 SPECIFICATIONS
Fuel Type
Test Standards
Recommended surface : 500 to 1900 sq. ft.
Heating capacity* – BTU/hr., EPA test wood: 34,700
Heating capacity* – BTU/hr., seasoned cordwood : 75,000
Optimum efficiency: 71%
*Why is the information indicated on the EPA label different than the one advertised?
You will notice a difference between the BTU output as indicated on the unit's white EPA label affixed to the glass
and the BTU as advertised on our web site and/or product literature. The maximum BTU output we advertise for this
unit is what will be obtained with a full load of seasoned cordwood inserted inside the firebox. The EPA output, on
the other hand, is what has been obtained during emissions testing. The EPA test procedure requires that a special
type of wood be used and positioned inside the firebox in a manner that does not represent the way the firebox
volume would normally be utilized using seasoned cordwood. The EPA test load is typically much smaller. Hence,
the BTU as per the EPA label is reduced. The BTU output that should be considered by a normal user is the one we
advertise for seasoned cordwood. With regards to the efficiency, the percentage reported on the EPA label is a
default value. It does not represent the tested efficiency of the unit. The tested efficiency is the one we advertise on
our web site and inside this owner's manual.
Shipping Weight
Firebox Volume
Firebox Floor Area
Door Opening Size
Recommended
Log Size
Flue Outlet
Cordwood
ULC S627 (CSA B366.2) & UL 1482 residential.
391 lbs (177 kg)
2.4 cubic feet (0,067 m
16.5''W x 21.5''D (419 mm x 546 mm)
14.75" wide x 9.25" high (450 mm x 220 mm)
20" x 6" Dia. (508 mm x 152 mm) if loading sideways
6" (152 mm) diameter (vertical)
3
)
43
Advertisement
Table of Contents
