Cisco TELEPRESENCE MOVI 4.1 - ADMINISTRATOR GUIDE V4.1.1.9724 Administrator's Manual page 26

Field name Description
Max Restrictions taken from Movi's settings.
allowed
bitrate
Signaled The signaled bitrate combines Movi's restrictions with those from the far end.
bitrate
Configured The configured bitrate varies based on automatic bandwidth adaptation. This value is not
bitrate transmitted to the far end.
Encryption This field is blank if no encryption is used.
Protocol The video and audio standards currently in use.
Resolution The current outgoing and incoming resolution. This value changes based on automatic
adaptation.
Bitrate The actual bandwidth sent and received, which will always be equal to or lower than the
configured bitrate.
Total Number of packets lost during the call so far.
packet
loss
Current Percentage of packets lost in the last five seconds (transmit) or three seconds (receive).
packet
loss
Post FEC Number of packets recovered (FEC = forward error correction) by ClearPath.
total
Post FEC Percentage of packets recovered by ClearPath in the last three seconds.
current
Jitter Jitter is a continuously calculated estimate of the mean deviation of the difference in transit time
of adjacent packets. The transmit jitter information is based on RTCP reports from the far end.
High jitter affects the call quality and is usually indicative of poor network conditions.
Cisco TelePresence Movi Administrator Guide (4.1)
Running the client
Page 26 of 29